Syringe Pumps and Fluid Handling
Syringe Pumps and Peristaltic Pumps
Syringe Pumps and Fluid Handling Categories
-
Accessories (7)
-
Dual Rate Syringe Pumps (2)
-
High Pressure Syringe Pumps (1)
-
Infusion Syringe Pumps (10)
-
Infusion/Withdrawal Syringe pumps (11)
-
Legato Syringe Pumps (10)
-
Managed, Networked Infusion Pumps (4)
-
OEM pumps (1)
-
Peristaltic Pumps (2)
-
Programmable (6)
-
Push/Pull Syringe Pumps (4)
-
Volume Dispense System (1)
Syringe Pumps and Fluid Handling
Showing 1–15 of 39 results
-
Accessories, Syringe Pumps and Fluid Handling
Hamilton® Gastight® 1000/1700 Syringes
Ideal for dispensing both liquids and gases. The precision-machined PTFE plunger tip creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it reduces the chance that a deposit will occur and cause the plunger to freeze. Available in sizes from 50 µl to 100ml.
-
Infusion Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 200 /200P Legacy Dual Syringe Infusion Pump
Two-Syringe Infusion Pump. This feature-laden two-syringe infusion pump combines a broad speed range and holds a wide range of syringe sizes to meet the requirements of virtually any laboratory application.
-
Infusion/Withdrawal Syringe pumps, Syringe Pumps and Fluid Handling
KDS 210 /210P Legacy Dual Syringe, Infusion/Withdrawal Pump
The KDS210 offers you more advanced features than any other infusion / withdrawal pump in its price range – including five operating modes plus independent rate and volume settings for both infusion and withdrawal.
-
Infusion/Withdrawal Syringe pumps, Syringe Pumps and Fluid Handling
KDS 230 / 230P Legacy Infusion / Withdrawal Pump
Ideal for applications requiring multiple syringes, the KDS230 is an adaptation of the KDS210. The pump operates exactly like a KDS210, but has been modified to hold up to 10 syringes.
-
Infusion Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 250 /250P Legacy Four-Syringe Microlitre Infusion Pump
Four-Syringe Microdialysis Infusion Pump. Each syringe can be sized differently and is clamped independently.Discontinued – Recommended alternative Legato 200 with 788302 micro syringe rack
-
Push/Pull Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 260 /260P Legacy Four Syringe, Single Cycle, Push-Pull Pump
This KDS pump provides simultaneous infusion and withdrawal with opposing syringes on a single drive. The KDS260 is an adaption of the KDS210. The pump has been modified to hold an additional syringe so that as one syringe infuses, while the second syringe withdraws at the same rate. The Push/Pull mode is designed for one cycle only.Discontinued – Recommended alternative Legato 270
-
Continuous Flow, Push/Pull Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 270 /270P Legacy Four Syringe, Continuous Flow, Push-Pull Pump
The KDS270 can hold up to four syringes and can cycle continuously back and forth in a push-pull action. As two syringes are infusing, two syringes are withdrawing at the same rate. At the end of the set volume the direction is automatically reversed and the next cycle begins. With the use of 3-way valves the pump can empty and refill syringes for a continuous dispense.Discontinued – Recommended alternative Legato 270
-
Infusion/Withdrawal Syringe pumps, Syringe Pumps and Fluid Handling
KDS 310 Plus Nano Legacy Syringe Pump
Th
e KDS310 Nano Pump is used exclusively with micro syringes. Small size, remote control and a rugged mounting arm make it ideal for use with micromanipulator, stereotaxic and other clamping devices.Discontinued – Recommended alternative Legato 130
-
High Pressure Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 410 /410P Legacy Single Syringe, High Pressure, Infusion/Withdrawal Pump
Higher Force Pump for Demanding Applications. The KDS 410 is a high pressure syringe pump which more then doubles the linear force available on the KDS 200 series.
-
Accessories, Syringe Pumps and Fluid Handling
Hamilton® Gastight® 1000/1700 Syringes
Ideal for dispensing both liquids and gases. The precision-machined PTFE plunger tip creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it reduces the chance that a deposit will occur and cause the plunger to freeze. Available in sizes from 50 µl to 100ml.
SKU: Gastight syringes -
Infusion Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 200 /200P Legacy Dual Syringe Infusion Pump
Two-Syringe Infusion Pump. This feature-laden two-syringe infusion pump combines a broad speed range and holds a wide range of syringe sizes to meet the requirements of virtually any laboratory application.
SKU: KDS200/200P -
Infusion/Withdrawal Syringe pumps, Syringe Pumps and Fluid Handling
KDS 210 /210P Legacy Dual Syringe, Infusion/Withdrawal Pump
The KDS210 offers you more advanced features than any other infusion / withdrawal pump in its price range – including five operating modes plus independent rate and volume settings for both infusion and withdrawal.
SKU: KDS210/210P -
Infusion/Withdrawal Syringe pumps, Syringe Pumps and Fluid Handling
KDS 230 / 230P Legacy Infusion / Withdrawal Pump
Ideal for applications requiring multiple syringes, the KDS230 is an adaptation of the KDS210. The pump operates exactly like a KDS210, but has been modified to hold up to 10 syringes.
SKU: KDS230/230P -
Infusion Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 250 /250P Legacy Four-Syringe Microlitre Infusion Pump
Four-Syringe Microdialysis Infusion Pump. Each syringe can be sized differently and is clamped independently.Discontinued – Recommended alternative Legato 200 with 788302 micro syringe rack
SKU: KDS250/250P -
Push/Pull Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 260 /260P Legacy Four Syringe, Single Cycle, Push-Pull Pump
This KDS pump provides simultaneous infusion and withdrawal with opposing syringes on a single drive. The KDS260 is an adaption of the KDS210. The pump has been modified to hold an additional syringe so that as one syringe infuses, while the second syringe withdraws at the same rate. The Push/Pull mode is designed for one cycle only.Discontinued – Recommended alternative Legato 270
SKU: KDS260/260P -
Continuous Flow, Push/Pull Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 270 /270P Legacy Four Syringe, Continuous Flow, Push-Pull Pump
The KDS270 can hold up to four syringes and can cycle continuously back and forth in a push-pull action. As two syringes are infusing, two syringes are withdrawing at the same rate. At the end of the set volume the direction is automatically reversed and the next cycle begins. With the use of 3-way valves the pump can empty and refill syringes for a continuous dispense.Discontinued – Recommended alternative Legato 270
SKU: KDS270/270P -
Infusion/Withdrawal Syringe pumps, Syringe Pumps and Fluid Handling
KDS 310 Plus Nano Legacy Syringe Pump
Th
e KDS310 Nano Pump is used exclusively with micro syringes. Small size, remote control and a rugged mounting arm make it ideal for use with micromanipulator, stereotaxic and other clamping devices.Discontinued – Recommended alternative Legato 130
SKU: KDS310 -
High Pressure Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 410 /410P Legacy Single Syringe, High Pressure, Infusion/Withdrawal Pump
Higher Force Pump for Demanding Applications. The KDS 410 is a high pressure syringe pump which more then doubles the linear force available on the KDS 200 series.
SKU: KDS410/410P
-
Accessories, Syringe Pumps and Fluid Handling
Hamilton® Gastight® 1000/1700 Syringes
Ideal for dispensing both liquids and gases. The precision-machined PTFE plunger tip creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it reduces the chance that a deposit will occur and cause the plunger to freeze. Available in sizes from 50 µl to 100ml.
-
Infusion Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 200 /200P Legacy Dual Syringe Infusion Pump
Two-Syringe Infusion Pump. This feature-laden two-syringe infusion pump combines a broad speed range and holds a wide range of syringe sizes to meet the requirements of virtually any laboratory application.
-
Infusion/Withdrawal Syringe pumps, Syringe Pumps and Fluid Handling
KDS 210 /210P Legacy Dual Syringe, Infusion/Withdrawal Pump
The KDS210 offers you more advanced features than any other infusion / withdrawal pump in its price range – including five operating modes plus independent rate and volume settings for both infusion and withdrawal.
-
Infusion/Withdrawal Syringe pumps, Syringe Pumps and Fluid Handling
KDS 230 / 230P Legacy Infusion / Withdrawal Pump
Ideal for applications requiring multiple syringes, the KDS230 is an adaptation of the KDS210. The pump operates exactly like a KDS210, but has been modified to hold up to 10 syringes.
-
Infusion Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 250 /250P Legacy Four-Syringe Microlitre Infusion Pump
Four-Syringe Microdialysis Infusion Pump. Each syringe can be sized differently and is clamped independently.Discontinued – Recommended alternative Legato 200 with 788302 micro syringe rack
-
Push/Pull Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 260 /260P Legacy Four Syringe, Single Cycle, Push-Pull Pump
This KDS pump provides simultaneous infusion and withdrawal with opposing syringes on a single drive. The KDS260 is an adaption of the KDS210. The pump has been modified to hold an additional syringe so that as one syringe infuses, while the second syringe withdraws at the same rate. The Push/Pull mode is designed for one cycle only.Discontinued – Recommended alternative Legato 270
-
Continuous Flow, Push/Pull Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 270 /270P Legacy Four Syringe, Continuous Flow, Push-Pull Pump
The KDS270 can hold up to four syringes and can cycle continuously back and forth in a push-pull action. As two syringes are infusing, two syringes are withdrawing at the same rate. At the end of the set volume the direction is automatically reversed and the next cycle begins. With the use of 3-way valves the pump can empty and refill syringes for a continuous dispense.Discontinued – Recommended alternative Legato 270
-
Infusion/Withdrawal Syringe pumps, Syringe Pumps and Fluid Handling
KDS 310 Plus Nano Legacy Syringe Pump
Th
e KDS310 Nano Pump is used exclusively with micro syringes. Small size, remote control and a rugged mounting arm make it ideal for use with micromanipulator, stereotaxic and other clamping devices.Discontinued – Recommended alternative Legato 130
-
High Pressure Syringe Pumps, Syringe Pumps and Fluid Handling
KDS 410 /410P Legacy Single Syringe, High Pressure, Infusion/Withdrawal Pump
Higher Force Pump for Demanding Applications. The KDS 410 is a high pressure syringe pump which more then doubles the linear force available on the KDS 200 series.