, , ,

Legato 180 Dual Syringe, Programmable Touch Screen, Picoliter, Infusion/Withdrawal Pump

Dual syringe infuse/withdraw optimized for low flow with program options for 2 programs. 50 steps each. Accomodates syringes 0.5ul to 10ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.

Product Enquiry

If you would like to send us an enquiry about this product, please click the button below, fill in the form and submit.

Product Enquiry

Product Enquiry

Please fill out the form if you would like to enquire about this product.
  • Please indicate the name of your University or company

KD Scientific Legato 180 Dual Syringe, Programmable Touch Screen, Picoliter, Infusion/Withdrawal Pump

Dual syringe infuse/withdraw optimized for low flow with program options for 2 programs. 50 steps each. Accomodates syringes 0.5ul to 10ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.

Features:
  • Holds one or two syringes from 0.5ul to 10ml
  • High resolution color touch screen
  • Unparalled ease of use
  • Touch pad “lock” feature
  • LED light on front panel
  • Full metal chassis
  • Built in syringe table
  • Up to 30 lbs linear force
  • Advanced microstepping techniques
  • Built in RS485 interface
  • USB port
  • I/O & TTL interface
  • Continuous mode of operation
  • Spill dam
  • Programmable

 

Technical Literature

Legato 100 Series Manual
Legato 100 Series Quick Start Guide
KDS Legato® 180 Datasheet
KDS Legato® Family Datasheet
Declaration of Conformity for the Legato 100 Series Syringe Pumps
Accuracy: ± 0.35%
Reproducibility ± 0.05%
Syringes (Min/Max) 0.5 ul to 10ml
Flow Rate: Minimum (0.5 ul syringe): 0.58 pl/min
Maximum (10ml syringe): 11.70 ml/min
Display 4.3 WQVGA TFT Color Display with Touchpad
Non-Volatile Memory Stores all Settings
Connectors: RS485 – IEEE-1394 6 pos
USB – Type B
I/O & TTL – 15 pin D-Sub Connector
Linear Force (Max) 13.6 kg (30 lbs) @ 100% Force Selection
Drive Motor 0.9 Stepper Motor
Motor Drive Control Microprocessor with 1/16 microstepping
Number of Microsteps
per one rev.of Lead Screw
20,480
Step Revolution 0.031 um/ustep
Step Rate – Minimum 27.5 sec/ustep
Step Rate – Maximum 26 usec/ustep
Pusher Travel Rate – Minimum 0.02 um/min
Pusher Travel Rate – Maximum 71.55 mm/min
Power 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions 22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)
Weight 2.66 kg (5.9 lbs)
Operating Temperature 4 degree C to 40 degree C
(40 degree F to 104 degree F)
Storage Temperature -10 degree C to 70 degree C
(14 degree F to 158 degree F)
Humidity 20% to 80% RH non condensing
Mode of Operation Continuous
Classification Class 1
Pollution Degree 1
Installation Category 11
Regulatory Certification CE, UL, CSA, CB Scheme, EU RoHS

You may also like…